FEATURES:

• A true OFF-ROAD design - not just a beefed up road trailer (hot dip galvanised after construction for long term corrosion resistance).
• Heavy duty and extended drawbar with "TRIGG" off road coupling.
• Australian made off-road leaf springs and axles
• A stabiliser leg fitted to rear corners of the trailer to facilitate easy levelling of the trailer when setting up camp and provide a solid base for the tent.
• One lockable 4.5kg gas bottle holder.
• White 'Sunraysia' 15" x 7" wheels and good quality tyres (235/75R15) - 3 supplied - with the spare mounted on a lockable pedestal on the drawbar.
• Heavy duty, fold up 'jockey wheel'.
• Large (450mm x 400mm x 300mm) lockable battery stowage - to suit a battery of 100/120ah.
• Gas struts on bed board to assist lifting and holding of the top when accessing interior of trailer before erecting the tent.
• 20lt. Jerry can holder.
• The trailer is hot dip galvanised AFTER manufacture to provide full protection both to the outside and the inside of the structural members - we want your trailer to look good for a long time - not end up a rusted heap of junk after a few beach camps. When trailers are constructed using pre-galvanised members the galvanising is destroyed INSIDE the members during construction - then they spray cold gal paint over the external welds allowing the members to rust out from the INSIDE! The only true protection is to fully HOT DIP the trailer AFTER construction. It is a big investment so why pay top dollar for an inferior job?

All this adds up to a great camper trailer - not the cheapest camper trailer. The choice is yours you can buy the best and enjoy trouble free camping or you can buy an inferior camper that will fall apart and ruin your holiday.

A Medium/Small unit which provides 16.89 square meters of living space PLUS 4 square meters of off the ground sleeping space. The generous dimensions are shown in the above image. This is designated as the *169. (Drawing not to scale)

Our second is a larger unit with a massive 21.12 square meters of living area PLUS 4 square meters of off the ground sleeping space. This unit also has vertical walls which give full headroom right to the edge of the tent. This is designated as the *211 (Drawing not to scale)

Either of these camper trailers will suit from one person to a family of four with plenty of room while still retaining ease of erecting and stowing.

Colours have been specially chosen to provide for cooler interior and keep the natural feeling for either grass or water. Green and blue are the most naturally soothing "feel good" colours for humans - so the green fields and calm water colour schemes were chosen.

The 169 has pantone number 364 C roof and 372 C walls. Dark green roof for shade and light green walls for the feeling of a shady tree in open grassy fields.

The 211 has pantone number 541 C roof and 543 C walls. This provides a deep blue and light blue contrast to give a cooler interior and the feeling of looking out over a sky blue lake from under a shady tree.

While considering the various fit outs of the campers we have used over the years and the options offered on the market we were quick to note the way many force you to have your kitchen in one fixed location. This does not happen with our campers.

Instead of having your kitchen in a fixed slide out or swing out location we let you choose where you want to do your food preparation - instead of restricting you in flexibility and also dominating the available space. Inside - outside - you get to make the choice that suits you at the time - we do not try to dominate your camping holiday by making you do what we want.

For radio hobbyists the unit can be fitted with a portable mast to facilitate antenna mounting. Making a great asset for portable contesting or just keeping in touch while enjoying your outback adventure in this fantastic country.

.....

Full box chassis/frame - made to last not to a price.

.....

The drawbar is tough and long - giving good reversing control of the trailer - the triple members give full support right back to the front of the spring hanger to spread the load stress. The central drawbar member is braced back to the fore and aft chassis member as well as being welded to the chassis cross members. This configuration spreads the load and offers the highest strength to weight ratio.

.....

Plenty of wheel arch clearance has been built in to reduce the potential for the wheels becoming jammed in the arches in sticky muddy conditions.

A fold up jockey wheel has been fitted in a protected position and the TRIGG BROS. 2000kg polyblock off road coupling has been installed to provide the flexibility needed for real off road work.

.....

.....

.....

.....

PROSPECTING EQUIPMENT.

"Rockhounding" and "Gemstone Fossicking" as well as "Gold Prospecting" all go hand in hand with camping.

With that in mind we have included in our inventory a fantastic fold-away gravel washer ("Willoughby" style) and sorting table combination PLUS a fantastic recirculating gold sluicewashing table, and a strong tripod sieve shaker.

The fold-away gravel washer/sorting table is easy to assemble and easy to stow away and provides a work station to wash and then examine the wash on a convenient waist high sorting table - the recirculating sluice means you can wash fines even where no water is available if you simply cart in 60lt of water to fill the sumps. The sluice table fits onto a shaker hopper to sieve the coarse wash down to fines which are then washed using the sluice which is fitted to the hopper in place of the 3 stage seives.

All fully hot dip galvanised for a long corrosion free life.